Stormwater Management
During Construction
Created by Environmental Health and Safety
Training Experts -
Course Description:
This course has been developed for the Erosion Control Supervisor
Responsible for the proper installation, maintenance and inspection
of Best Management Practices (BMPs) for the control of erosion and
sedimentation at construction sites.
Learning Objectives:
-
Describe the process of erosion and sedimentation
-
Describe the installation
requirements for BMPs for erosion and sediment control
-
Describe BMPs to control sources of pollution on construction
sites
-
List
the duties of the Erosion Control Supervisor
Topics
Covered:
-
Regulatory Requirements
-
The Problem of Erosion and
Sedimentation
-
Best Management Practices for
Erosion Control
-
Best Management Practices for
Sediment Control
-
Materials Handling and Waste
Management
Regulatory
Requirement::
Please see the state/regulatory requirement from the course demo
page.
Seat Time:
This course has been approved for 8 hours.
Course Prerequisites:
N/a
Testing:
Quizzes - All quizzes must be passed with a 100% to proceed forward
to the next lesson.
Final Exam- Final Exam must be passed with a 70% to pass the course.
The final exam can be taken three times if necessary.
Tuition:
US$95.00
To
preview a course demo or to enroll
click
here .
If you are a corporate
training visitor, please feel free to view the demos but then
contact us by email (click
here) or telephone (416-698-8230) and
we will be pleased to discuss potential corporate rates based on the
volume of subscriptions you wish to purchase.
Here is a listing of our
Environmental courses. Click on the title for more information.
1.
ISO 9001:2000 – Internal Auditor Course
2.
Environmental First Responder Operations Level
3.
HAZWOPER
8 hr Refresher with Blood Borne Pathogens Module
4.
HAZWOPER
8 HR Refresher
5.
Stormwater Management during Construction
6.
Risk
Management Program Compliance
7.
ISO-9001-2000 Introduction and Management Overview
8.
Environmental First Responder Awareness Level
9.
The Clean
Air Act
10.
ISO 14000
11.
DOT
Hazmat General Awareness
12.
OHSAS
18001
13.
Occupational Health & Environmental Controls
14.
Hazards
of Asbestos in the Workplace
15.
General
Safety- Beryllium and Cadmium Hazards in the Workplace
16.
Ionizing
and Non-ionizing Radiation Safety
17.
Industrial Hygiene
18.
Materials Handling & Storage
back to top
Back
to EPA Virtual University Page
© The Training Bank